Thank you for your interest in part number 4289, a component manufactured by General Dynamics Global Imaging that we sell here on NSN Parts Finder. For your reference, this item is presented with the NSN 5905-01-285-5488 and features the description “Resistor Variable Wire Wound Pre.” To request a quote for part number 4289, simply fill out the form below with key details like your budget, required quantity, and anticipated fulfillment timeline. Within 15 minutes of receiving and reviewing your submission, our staff members will present you with competitive purchasing options tailored to your needs. Alternatively, you are also welcome to give us a call or email, and we will gladly guide you through the quotation process or discuss any custom solutions you happen to be seeking.
Note : We Will Not Share Your Information To Any Third Parties.
With a global supply chain and ample purchasing power, we can provide highly competitive pricing and swift lead times on numerous NSN 5905-01-285-5488 products. More than that, we exclusively procure our inventory from reliable manufacturers to guarantee quality, including this component from General Dynamics Global Imaging, which is associated with the CAGECode 10112. Keeping this in mind, get in touch with our specialists today to secure a quote on the FSC 5905 Resistors part number 4289.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-285-5488 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 012855488 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 741-6508 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.125 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.250 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | SPEC PROJ ERA |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 1.243 CUBIC INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 97424-5839K70 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
