Thank you for your interest in part number 135189-1, a component manufactured by Lockheed Martin Corporation that we sell here on NSN Parts Finder. For your reference, this item is presented with the NSN 5930-01-342-5784 and features the description “Switch Rotary.” To request a quote for part number 135189-1, simply fill out the form below with key details like your budget, required quantity, and anticipated fulfillment timeline. Within 15 minutes of receiving and reviewing your submission, our staff members will present you with competitive purchasing options tailored to your needs. Alternatively, you are also welcome to give us a call or email, and we will gladly guide you through the quotation process or discuss any custom solutions you happen to be seeking.
Note : We Will Not Share Your Information To Any Third Parties.
With a global supply chain and ample purchasing power, we can provide highly competitive pricing and swift lead times on numerous NSN 5930-01-342-5784 products. More than that, we exclusively procure our inventory from reliable manufacturers to guarantee quality, including this component from Lockheed Martin Corporation, which is associated with the CAGECode 94271. Keeping this in mind, get in touch with our specialists today to secure a quote on the FSC 5930 Switches part number 135189-1.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-342-5784 Item PartTypeName: SWITCH,ROTARY | 5930 | 013425784 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LO4407 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4407 |
| ABNC | FLAT HEIGHT | 0.216 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM SINGLE ACTUATOR AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 3 |
| AFGA | OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPY | THROW QUANTITY | 3 EACH SECTION REAR |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| ABNB | FIRST FLAT LENGTH | 0.230 INCHES MINIMUM SINGLE ACTUATOR AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| AXGY | MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 0.03 DC AT SEA LEVEL |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | 0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR |
| PMLC | PRECIOUS MATERIAL AND LOCATION | ROTOR AND CONTACT SURFACES GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.417 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | 1.566 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.417 INCHES MINIMUM SINGLE ACTUATOR AND 0.457 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM |
| AFDC | NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| AKPX | POLE QUANTITY | 1 EACH SECTION FRONT |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 10.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| PRMT | PRECIOUS MATERIAL | GOLD |
| STYL | STYLE DESIGNATOR | TAP,CIRCULAR,BUSHING MOUNT |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
